Getting Started with Longarm Quilting - Handi Quilter

Smiling quilter using an HQ Amara longarm

Get
Started

Start with the basics—from getting comfortable with your machine to loading your first quilt and taking those first stitches. We'll help you learn as you quilt and build confidence from there.

Learning made easy

A few notes before we get started.

Congratulations on your new longarm. This step-by-step guide helps you get started and take your first stitches. Short videos and written instructions let you watch, learn, and practice at your own pace—and revisit steps anytime.

For all Handi Quilter longarms. Most videos feature the Amara 20, but the basic steps apply to all models. Moxie and Infinity owners should look for Machine Note callouts highlighting any differences.

Duration

1 hr

Time including setting up

Parts

3

Learn in three units

Hands on

15 min

Time stitching

Skill level

Any

Gets you going right away

Machine

All

For all HQ longarms

Smiling quilter using an HQ longarm in a cozy sewing room

Let’s go. Get comfy.

Forget perfect stitches or finishing a whole quilt for now. Just get to know your machine, try stitch regulation, and practice a few lines, curves, and loops. By the end, you’ll have made your first regulated stitches and started building confidence at your machine.

PART ONE

Get to know your longarm.

Tension, timing, and stitch regulation are behind most longarm questions. Get to know these three, and you'll know what's normal, and what to check first when something feels off.

1 Learn a few basics

What is tension?

How your top and bobbin threads work together.

What is stitch regulation?

Keep your stitches even at any speed.

What is machine timing?

What timing is, and why it matters.

2 Gather what you'll need

Quilting supplies – scissors, thread and notions – on a pink background

Keep it simple for your first session. Here's what to have within arm's reach:

  • 2 to 3 HQ M-Class bobbins, evenly wound with quality 40wt or 50wt polyester or cotton thread
  • One spool or cone of top thread, 40wt or 50wt
  • A new longarm needle, size 16/100 or 18/110
  • Pins for attaching your backing to the leaders
  • A permanent marker for marking centers
  • Thread snips
  • Handi Quilter oiler and lint brush
  • A practice quilt sandwich, about 36" x 36": cotton backing and solid top panel with 80/20 cotton-poly batting

A little tip: A light, solid fabric for your practice top, with contrasting thread, makes your stitches easier to see while you practice.

PART TWO

Prep your machine.

Keep your machine off for this part. It's a good habit: any time your hands are near the needle, the power is off.

1 Get your bobbin ready

Play video

How to wind a bobbin

Start with a full, evenly wound M-Class bobbin. New to winding? It's easier than it looks, and this video walks you through it.

2 Load, test, clean, and insert

Bobbin Basics

3 Check the needle

Longarm needle on a teal background

Check your needle first

Make sure a fresh needle is installed correctly, with the long groove facing forward and the scarf facing the back.

Play video

How to change your needle

You checked your needle and it needs to be installed or changed. Follow along and swap it out.

4 Thread your longarm

Play video

How to thread your longarm

Now you're ready to thread the longarm, from mast to needle.

PART THREE

Prep your frame.

Now let's look at your frame and get it set up to quilt.

1 Meet your frame

Longarm quilting frame

Before you load anything, take a minute to make sure everything is ready to move smoothly.

  • Clean Your Tracks
    A quick wipe of the rails and carriage tracks with a microfiber cloth helps your machine glide smoothly.
  • Check Your Cords
    Move your machine to each corner of the frame and make sure no cords pull tight or get caught.

Everything moving freely? You're ready for the next step.

2 Install your leaders

Choose the video for your frame. Leaders already on? Skip to Step 2.

Installing frame leaders: Studio3 / Gallery3
Installing Frame Leaders on Your Little Foot Frame with the Little Buddy

Machine Note: The leader and loading videos show the Studio3/Gallery3 and Little Foot frames. If you have a different frame, follow the leader and loading steps in your frame's manual. The ideas are the same: centers matched, leaders straight, layers smooth.

3 Load a practice quilt sandwich

A practice quilt gives you room to experiment, make mistakes, and learn without worrying about the finished result. The videos walk you through every step.

Play video

Loading your frame: Studio3 / Gallery3 standard view (position 1)

A great place to start.

Play video

Loading your frame: Studio3 / Gallery3 clear view (position 2)

Popular for ruler work.

Play video

Loading your frame: Little Foot + Little Buddy

For Little Foot owners using the Little Buddy kit.

PART FOUR

Start stitching.

Now you're ready to start bringing it all together.

1 Bring up your bobbin thread

Bringing up the Bobbin Thread

Bring your bobbin thread up before every line of stitching to keep the back of your quilt tangle-free. Watch the video or follow these steps:

  1. Move Your Machine To Your Starting Point.
  2. Hold The Tail Of Your Top Thread.
  3. Press The Needle Up/Down Button Twice
    This brings the needle down and back up.
  4. Gently Tug The Top Thread.
    You'll see a small loop of bobbin thread come up through the quilt.

    No loop? Check that your needle is threaded and your bobbin case is clicked in, then try again.
  5. Move The Machine Back A Few Inches
    This will make the loop bigger. Then pull the bobbin thread all the way up, so both tails are on top.
  6. Move Back To Your Starting Point.
    Holding both tails, quilt a few stitches to lock your threads in place.

2 Check your top tension

Tensioning the Top Thread

Your bobbin tension is already set from Part 2, so now let's balance the top tension.

  1. Pick a spot near the edge of your practice quilt. (On a real quilt, you'd test on a scrap placed on the extra batting and backing.)
  2. Stitch some small loops and a little zigzag. Curves and points show tension problems that straight lines can hide.
  3. Check both sides.
    • Bobbin thread showing on top? Your top tension is too tight.
    • Top thread pulling through to the back, with little eyelashes on the curves? It's too loose.
  4. Turn the tension dial clockwise to tighten or counterclockwise to loosen. Go about a quarter turn at a time.
  5. Stitch again, check both sides, and adjust until your stitches look the same on top and underneath. A little trial and error to get it right is normal.

3 Try stitch modes

Basic Stitching Functions

Your longarm has three stitching modes: Manual, plus two regulated modes, Cruise and Precision.

Manual: You set the speed. The faster you move, the longer your stitches.

Regulated: Your stitches stay even at any speed. Choose one of two options: 

  • Cruise: starts stitching as soon as you press Start/Stop. When you pause, the needle keeps a slow, steady pace, which helps when you're stitching smooth curves and sharp points.
  • Precision: stitches only when you move the machine. It's handy when you want time to pause or reposition.

A good place to start

Now for the fun part. For your first practice session, try:

Mode: Regulated, Cruise
Stitches per inch: 10 to 11
Cruise speed: 175 stitches per minute 

You can change these later. For now, the goal is simply to feel how the machine responds to you.

Try this

  1. First, make sure that bobbin thread is up.
  2. On your screen, select Regulated, then Cruise.
  3. Press Start/Stop on your handlebar, then get moving right away.
  4. Move the machine slowly across the fabric. Then move a little faster.

Notice how your stitch length stays the same as your speed changes.

Pause for a moment and notice how Cruise keeps stitching at its slow, steady pace.

Press Start/Stop when you're ready to stop.

Machine Note: Moxie and Moxie XL

Your screen looks a little different from Amara’s, but Cruise and Precision work the same way. Moxie doesn’t have a Regulated button. Instead, each mode has its own icon on your Home screen:

Cruise
: Tap the Cruise icon (C). Then use the + and – buttons to set your cruise speed (stitches per minute) and your stitch length (stitches per inch).

Precision:
Tap the Precision icon (P). Then use the + and – buttons to set your stitch length (stitches per inch).

So for step 2 above, just tap the Cruise icon. To change a setting later, press Start/Stop to pause first. Moxie won’t let you adjust your settings while it’s stitching.

4 Now, just play

Don't worry about making anything pretty yet.

Quilter's hands guiding a longarm with Pro-Stitcher over a quilt

Spend about 10 minutes getting used to how your longarm moves. Relax your shoulders, keep a light touch on the handlebars, and try these three simple exercises

Make Some Straight Lines
Move left to right, then right to left. Don't worry if they aren't perfectly straight. Pay attention to how much, or how little, pressure it takes to guide the machine.

Make Waves and Loops
Try gentle waves, curves, circles, and loops. Focus on keeping your movement easy and continuous rather than making every shape match.

Sign Your Name
Yes, really. Write your name in cursive with the machine, just like you would with a pen. Your hand already knows those movements, so it's an easy way to get a feel for guiding the machine in different directions.

Wobbly stitches count
Today is about getting comfortable.

5 Troubleshooting

Every quilter runs into a few hiccups, especially at first. If something seems off, start with these simple checks before changing a bunch of settings.

A tangle or nest of thread on the back 

Bring your bobbin thread up before you start stitching. If it keeps happening, rethread your top thread so it sits snugly between the tension discs.

Watch Bringing Up the Bobbin Thread
Loops or "eyelashes" on the back 

Your top tension is too loose. Make sure the thread is between the tension discs, then turn the tension dial clockwise a quarter turn and test again. 

Watch Tensioning the Top Thread 
Bobbin thread showing on top 

Your top tension is too tight. Turn the tension dial counterclockwise a quarter turn and test again.

Watch Tensioning the Top Thread 
Top thread shredding or breaking 

Check that your needle is installed correctly and is the right size for your thread. Make sure the thread moves freely through the whole thread path. If it keeps happening, contact your retailer.

Needle unthreads when you start 

Bring your bobbin thread up before you start stitching. If it keeps happening, rethread your top thread so it sits snugly between the tension discs.

Watch Bringing Up the Bobbin Thread
Movement feels bumpy or hesitant 

Check your tracks and carriage wheels for lint, thread, or anything else that could get in the way of a smooth glide.

Watch Meet Your Longarm Frame 

NEED HELP?

We're ready to help.

HQ Technical Support

1-877-MY-QUILT (1-877-697-8458)

Local Handi Quilter Retailer

a great resource for hands-on help, and local classes

Handi Quilter Education

find more tutorials, and learning resources at handiquilter.com/education

Smiling quilter holding a stack of colorful quilts in a sewing room

Free Guide

Start your journey with confidence.

Quilting is more than a craft—it's creativity you can hold. Every stitch tells a story, blending tradition with new possibilities. Whether you're just getting started or have years of experience, we're here to help you learn, create, and share what you love. Come meet new friends, and stitch your story.

Historic downtown main street storefronts at dusk

Retailers

Find your local shop.

Handi Quilter longarms and quilting accessories are sold at over 400 quilt stores and shops in North America. Shop local and meet your local quilt professionsls.

Discover
Three smiling women standing together against a pink background

Handi Quilter Community

Where quilting lives.

Quilting is more than a craft—it's creativity you can hold. Every stitch tells a story, blending tradition with new possibilities. Whether you're just getting started or have years of experience, we're here to help you learn, create, and share what you love. Come meet new friends, and stitch your story.