Leaders are the fabric strips you pin your quilt layers to. Let's get them on your frame and centered, so your quilt loads straight.
What You'll Need
You'll need a permanent marker and the leaders that came with your frame: one wide super-leader and two standard leaders.
- Permanent marker
- Leader set: 1 wide super-leader and 2 standard leaders
Before You Begin
First, make sure your take-up, backing, and quilt top poles each have a hook-and-loop strip applied to the pole. If one doesn't, start at one end and press the strip on, using the holes to keep it straight.
Install Your Leaders
1. Mark the centers
Start by finding the center of each leader. Fold it in half end to end, and mark the fold on both long edges. Then mark the center of each pole.
2. Attach the super-leader to the take-up pole
The wide super-leader goes on the take-up pole, at the back of the frame. Line up the center marks, then press it onto the hook-and-loop strip, working from the center out to each end. Keep it straight as you go
It should drape over the top of the pole and fall toward the back, so the printed side is facing the back of the frame.
3. Attach the leader to the backing pole
Next, let's find your backing pole.
- StandardView: the outer front pole is your backing pole, and the inner front pole is your quilt top pole.
- ClearView: the two front poles sit at different heights. The upper front pole is your backing pole, and the lower front pole is your quilt top pole.
In either view, attach a standard leader to the backing pole the same way you did the take-up pole, so it falls toward the back with the printed side facing back.
4. Attach the leader to the quilt top pole
For the quilt top pole, the direction the leader drapes depends on which view your frame is set up in.
- StandardView: attach it the opposite way from the other leaders, so it falls toward the front with the printed side facing forward. The two front leaders will meet in the space between the poles.
- ClearView: attach it just like the others, falling toward the back with the printed side facing back.
5. Roll up the leaders
Now engage the ratchet stop on each pole and roll up the leaders.
Ready to Load
That's it. Your leaders are on, and you're ready to load your quilt.