Bringing up the Bobbin Thread

Every time you start stitching, bring your bobbin thread up to the top of your quilt. It only takes a few seconds, and it keeps your threads from tangling into a nest on the back. Follow along with the video, or use the steps below as you go

Before You Begin

First, make sure you're set up. Your machine should be threaded, your bobbin in, and your quilt loaded on the frame.

  • Machine threaded
  • Bobbin installed
  • Quilt loaded

Hold, Stitch, Pull Up, Lock

1. Move to your starting point

With the needle up, use the handlebars to move the machine to the spot where you want to begin quilting.

2. Hold the top thread and take one stitch

Hold the tail of your top thread. Then press the Needle Up/Down button once to bring the needle down, and again to bring it back up.

You'll see a small loop of bobbin thread come up through the quilt top.

3. Pull up the bobbin thread

Gently pull your top thread to bring the bobbin thread all the way up, so both tails are on top.

If the loop is hard to grab, move the machine back a few inches to make it bigger.

4. Lock your stitches

Move back to your starting point. Holding both tails, quilt a few stitches in place to lock your threads.

Ready to Quilt

There you go. Both threads are on top, and you're ready to quilt. Make it a habit every time you start a new line of stitching, and the back of your quilt will stay neat and tangle-free.