Basic Stitching Functions

Let's get to know your handlebar buttons and basic stitch modes. We'll cover each one, and then it's your turn to practice.

Before You Begin

Before you begin, make sure your machine is on and threaded.

What You'll Need

All you need is a practice piece on your frame, so you can try things as you go.

Step 1: Know Your Handlebar Buttons

Let's start with the handlebars.

  • Start/Stop: On the right, this button does just what it says. Press once to start and again to stop. No need to hold it down.
  • Needle Up/Down: On the left is the Needle Up/Down button. Each press moves the needle either down into the quilt or back up.
  • Plus (+) and Minus (–): Plus and minus change your speed or stitch length, depending on your mode.

Step 2: Choose a Stitch Mode

Manual

In Manual mode, the needle runs at a set speed, so how fast you move sets your stitch length. Move faster for longer stitches, slower for shorter ones.

Precision

In Precision mode, stitch regulation keeps your stitches the same length no matter how fast you move. The needle only moves when you do, which makes it great for ruler work.

Cruise

Cruise mode also keeps your stitches even, but the needle never fully stops. It slows to a steady pace when you pause, which helps with sharp points.

Once you press Start/Stop, start moving right away. If you stay in one spot in this mode, stitches pile up and your thread can break.

Step 3: Set Your Stitches per Inch

In both Precision and Cruise modes, plus and minus set your stitches per inch. A higher number gives you smaller stitches. Tap plus or minus to change it.

Step 4: Set Your Needle Stop

Next, set your needle stop. When you stop quilting, the needle will rest either up or down. Down holds your place, so nothing shifts when you're working with rulers.

Step 5: Practice

Now play a little. Pull up your bobbin thread, then try each mode on your practice piece. Use plus and minus to adjust the speed until it feels comfortable.

Ready to Quilt

That's it. Keep a light touch on the handlebars, and have fun.