How to Wind a Bobbin

Let's walk through how to wind a bobbin so you're ready to quilt. Follow along with the video, or use the written steps below while you wind your own.

What You'll Need

You'll need your bobbin winder, thread, and an empty bobbin.

Wind Your Bobbin

1. Load the thread

Place your thread on the spool pin at the back of the bobbin winder.

2. Thread the mast

Pull the thread up and through the loop on the thread mast directly above.

3. Thread the pigtail guide

Bring the thread back down and around the pigtail guide.

4. Thread the tension discs

Floss the thread between the tension discs.

5. Load the bobbin

Place an empty bobbin onto the bobbin pin.

6. Thread the bobbin

Bring the thread through the slot in the bobbin, and hold on to the thread tail.

7. Start winding

Hold the thread tail and press the green Start button. Once the thread winds around the bobbin about a dozen times, gently pull the tail of thread to the side and it will snap off.

Tip: The finer your thread, the slower your machine speed. Setting 5 is usually a great sweet spot.

8. Stop the bobbin winder

The winder will stop automatically when the sensor is triggered. You can also use the red Stop button.

Check Your Bobbin

Check that the thread is wound evenly and the bobbin is full. The thread on the bobbin should feel really firm.

Your bobbin is wound and ready to use.